Here's another solution for Nokia 6303 classic with no display and it shows only a blank or empty screen, garbled or saturated screen display. Hang or frozen, white screen and blue screen can be fix by restoring or flash updating the phones firmware, but sometimes it is cause by a hardware problem issues especially those suffered by wet or water damaged.
This solution may only works if you already confirmed or tried replacing the LCD screen module and then you can still hear a tones or audio from the device.
The Nokia 6303 classic circuit layout, there is no EMI/ESD filter chips is being used, the display data signals are feeds directly from the CPU (RAPStack IC).
Some hints on how to fix the Nokia 6303 classic with display problem:
1. Check/replace and ensure the the LCD is working.
2. Calibrate the phones firmware, flash, restore and update it.
3. Visually check, clean or re-solder the LCD pin connector.
4. Check and trace the LCD supply voltages (VAUX 2.78V and VIO 1.8V) from the LCD pin connector down to the capacitor near the Power IC (AVILMA).
5. If all above procedure didn't solved, the possible faulty is the CPU IC (RAPStack). A re-hot, rework or replacing it, might only fix the problem.
This solution may only works if you already confirmed or tried replacing the LCD screen module and then you can still hear a tones or audio from the device.
The Nokia 6303 classic circuit layout, there is no EMI/ESD filter chips is being used, the display data signals are feeds directly from the CPU (RAPStack IC).
Nokia 6303 classic Display Connection Tracks
Some hints on how to fix the Nokia 6303 classic with display problem:
1. Check/replace and ensure the the LCD is working.
2. Calibrate the phones firmware, flash, restore and update it.
3. Visually check, clean or re-solder the LCD pin connector.
4. Check and trace the LCD supply voltages (VAUX 2.78V and VIO 1.8V) from the LCD pin connector down to the capacitor near the Power IC (AVILMA).
5. If all above procedure didn't solved, the possible faulty is the CPU IC (RAPStack). A re-hot, rework or replacing it, might only fix the problem.
0 comments "Nokia 6303 classic LCD Screen Display Problem Solution", Baca atau Masukkan Komentar
Post a Comment