Here's the Nokia E65 Solution for White Screen Display problem like, back light comes on as well as keypad lights and nothing happens. no tones, no voice, no logo , no text. Have not done anything just power up the phone while on charging thats sit or it either freezes at the Nokia screen, or a blank white screen comes up..
Note: white screen sometimes is caused by a faulty LCD, so try to replace the LCD first if you're not so familiar with white screen problem.
This solution may help fix the problem after flashing,restoring, resetting and updating the device firmware but nothing happens and still the phone stuck on white screen of death problem.
Just refer to the solution below for it is very useful and quite easy to solved and fix this white screen problem of Nokia E65.
The solution above shows the highlighted ZOKUS IC, this IC is a voltage regulator. Once faulty or damaged it will result to a white screen problem on Nokia E65. You may need to replace this IC to solved the problem. If having trouble finding the said chip you can remove it and apply a jumper wire remedy on it.
The capacitors are intended for bypassing the voltage supply to the CPU (which holds the display signal data).You can apply a jumper wire like one that shown on the solution above through to the other terminals of the Helen and RAP Vcore bypass capacitors., the other side of the capacitors is connected to ground and the other side is a VCORE voltage.
This solution was revived and created as per request by AKIRO on our Request box page.
Hope this helps... Enjoy..
Note: white screen sometimes is caused by a faulty LCD, so try to replace the LCD first if you're not so familiar with white screen problem.
This solution may help fix the problem after flashing,restoring, resetting and updating the device firmware but nothing happens and still the phone stuck on white screen of death problem.
Just refer to the solution below for it is very useful and quite easy to solved and fix this white screen problem of Nokia E65.
Nokia E65 LCD White Screen Display Jumper Solution
The capacitors are intended for bypassing the voltage supply to the CPU (which holds the display signal data).You can apply a jumper wire like one that shown on the solution above through to the other terminals of the Helen and RAP Vcore bypass capacitors., the other side of the capacitors is connected to ground and the other side is a VCORE voltage.
This solution was revived and created as per request by AKIRO on our Request box page.
Hope this helps... Enjoy..
0 comments "Nokia E65 White Screen Display Problem Solution- Revived Edition", Baca atau Masukkan Komentar
Post a Comment